不同浓度的尾砂胶结充填体破坏过程 声发射特性试验研究*

制备了3种不同质量浓度的充填体试件，进行了单轴压缩声发射试验，分析了不同浓度的充填体力学特性，重点研究了试件破坏过程中的声发射振铃计数、声发射累计撞击数与声发射累计能量的比值(r值)、主频及其相对高频信号激增响应系数特征。研究表明：随着浓度的增加，充填体的峰值强度与弹性模量呈增大趋势，充填体中出现的声发射累计振铃计数越多；r值先升高再持续减小到一个较低值，随着外载荷的增加，进入缓慢升高阶段，峰值前均保持在该阶段。充填体破裂前兆信息在声发射信号主频分布中呈现主频段增多现象，表现为由加载初期的1~2个主频段，在临界主破裂时增多到3~5个主频段；且随着浓度的增加，声发射信号主频频段分布越宽，声发射相对高频信号(160~180 kHz)的激增响应系数呈递减趋势。以上特征可为不同浓度的尾砂胶结充填体稳定性监测、预测提供依据。     

基于多基因遗传规划的储层岩石静态模量预测

声发射技术作为一种动态无损检测手段,主要实现对材料产生的缺陷进行动态监测及损伤位置的预测。微机电系统声发射传感器在检测材料疲劳裂纹位置和扩展方向上应用广泛,实现其对材料裂纹的3-D动态位移检测,对于无损检测技术的发展具有重要意义。该文提出了一种新型3-D微机电系统声发射传感器,首先对3-D微机电系统声发射传感器进行了结构设计和性能分析,结构方面主要包括z方向响应传感单元和x、y方向响应传感单元设计;其次通过传感器的阻尼、谐振点处灵敏度计算,证明传感器的性能良好;最后采用有限元软件ANSYS对z方向响应传感单元做了模态和谐响应分析,x、y方向响应传感单元做了模态分析和谐响应分析,仿真结果与理论值吻合较好,验证了结构设计的合理性,对实现材料裂纹的三维动态检测具有一定的参考意义。     

小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

H2S gas sensor based on integrated resonant dual-microcantilevers with high sensitivity and identification capability

Detection of trace-level hydrogen sulfide (H₂S) gas is of great importance whether in industrial production or disease diagnosis. This research presents a novel H₂S gas sensor based on integrated resonant dual-microcantilevers which can identify and detect trace-level H₂S in real-time. The sensor consists of two integrated resonant microcantilever sensors with different functions. One cantilever sensor can identify H₂S by outputting positive frequency shift signals, while the other cantilever sensor will detect H₂S as a normally used cantilever sensor with negative frequency shifts. Combined the two cantilever sensors, the proposed gas sensor can distinguish H₂S from a variety of common gases, and the detection limit to H₂S of the sensor is as sensitive as below 1 ppb.     

A hybrid numerical approach to predict the vibrational responses of panels excited by a turbulent boundary layer

In this work, a hybrid numerical approach to predict the vibrational responses of planar structures excited by a turbulent boundary layer is presented. The approach combines an uncorrelated wall plane wave technique with the finite element method. The wall pressure field induced by a turbulent boundary layer is obtained as a set of uncorrelated wall pressure plane waves. The amplitude of these plane waves are determined from the cross spectrum density function of the wall pressure field given either by empirical models from literature or from experimental data. The response of the planar structure subject to a turbulent boundary layer excitation is then obtained from an ensemble average of the different realizations. The numerical technique is computationally efficient as it rapidly converges using a small number of realizations. To demonstrate the method, the vibrational responses of two panels with simply supported or clamped boundary conditions and excited by a turbulent flow are considered. In the case study comprising a plate with simply supported boundary conditions, an analytical solution is employed for verification of the method. For both cases studies, numerical results from the hybrid approach are compared with experimental data measured in two different anechoic wind tunnels.     

Water‐Soluble Luminescent Hybrid Composites Consisting of Oligosilsesquioxanes and Lanthanide Complexes and their Sensing Ability for Cu2+

Water‐soluble hybrid composites with great potential for selective and sensitive sensing and that are obtained through simple, rapid, and environmentally friendly methods are highly desirable and remain a challenging task. Herein, we present luminescent hybrid composites that were realized by linking Na₃[Ln(dpa)₃] (dpa=2,6‐pyridinedicarboxylic acid) to octa‐amino functionalized polyhedral oligomeric silsesquioxane (POSS‐NH₂) through hydrogen‐bonding interactions between the oxygen atoms of the carboxylate groups of dpa and the hydrogen‐bond‐donor amino groups. The resulting hybrid composites Ln(dpa)₃@POSS‐NH₂ are highly soluble in aqueous solutions and the quantum yield of Eu(dpa)₃@POSS‐NH₂ is as high as 56.5 % or 46.3 % in the solid state and in aqueous solution, respectively, as determined by using the integrating sphere method. The novel water‐soluble luminescent hybrid composites exhibit high thermal and photostability, and the emitted colors of the resulting hybrid composite can be finely tuned by changing the Eu³⁺/Tb³⁺ ratio. Interestingly, Eu(dpa)₃@POSS‐NH₂ hybrid composites exhibited an effective switch‐off fluorescence response to Cu²⁺ over other common metal ions in aqueous media.     

不同抗凝比例对凝血四项检测结果的影响

目的观察并分析凝血四项检测结果与不同比例下的全血与抗凝剂之间的关系。方法研究对象取2015年6月来湖北省宜昌市第二人民医院参加体检的110例健康人员,抽取全血血液样本后按照不同比例与抗凝剂混匀,常规分离血浆并测定受试者凝血酶时间(TT)、凝血酶原时间(PT)、激活部分促凝血酶原激酶时间(APTT)以及纤维蛋白原(FIB),并对研究结果相关数据作统计学处理。结果当血液量与抗凝剂比例为1∶5时,标本TT、PT、APTT以及FIB各项指标较1∶9时差异显著而具有统计学意义(P0.05);抗凝比例1∶7的情况下,TT指标差异与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05);抗凝比例为1∶11与1∶13的情况下,TT指标与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05)。结论凝血四项检测工作中,标本质量检测控制最关键的环节在于准确采集血液量,倘若采集血量过多或过少,导致与抗凝剂比例失调往往会影响测定结果准确性,检验科工作人员应予以重视。     

On the uniqueness of semi-wavefronts for non-local delayed reaction–diffusion equations

We establish the uniqueness of semi-wavefront solution for a non-local delayed reaction–diffusion equation. This result is obtained by using a generalization of the Diekmann–Kaper theory for a nonlinear convolution equation. Several applications to the systems of non-local reaction–diffusion equations with distributed time delay are also considered.